ASA that is Acting as the VPN Server
username cisco password *******
!— Binds the dynamic map to the IPsec/ISAKMP process.
crypto map myMAP 60 ipsec-isakmp dynamic myDYN-MAP
!— The tunnel-group commands bind the configurations
!— defined in this configuration to the tunnel that is
!— used for EasyVPN. This tunnel name is the one specified on the remote side.
tunnel-group mytunnel type ipsec-ra
tunnel-group mytunnel general-attributes
default-group-policy myGROUP
tunnel-group mytunnel ipsec-attributes
!— The pre-shared-key.
pre-shared-key *
ASA that is Acting as the VPN Client
!— Easy VPN Client Configuration.
!— Specify the IP address of the VPN server.
vpnclient server 10.20.20.1
!— This example uses network extension mode.
vpnclient mode network-extension-mode
!— Specify the group name and the pre-shared key.
vpnclient vpngroup mytunnel password ********
!— Specify the authentication username and password.
vpnclient username cisco password ********
!— In order to enable the device as hardware vpnclient, use this command.
vpnclient enable